Home/Blog

Fibre composition by component: a textile passport data model

How to model textile fibre composition for a digital product passport: EU labelling rules, components, worked examples, recycled content and a clean-up list.

Fibre composition is the one passport field that almost every brand already has. It is printed on every care label and shown on every product page. That is exactly why it is easy to underestimate: the data usually exists as a line of text, and a line of text is not what a passport needs.

This article sets out what EU labelling law requires, why a single composition field breaks down, and how to model composition per component, with two worked examples. It ends with a checklist for cleaning up the product files you already have.

What does the Textile Labelling Regulation require?

Regulation (EU) No 1007/2011, the Textile Labelling Regulation (TLR), is the existing legal basis for composition on EU labels. Its main rules for a passport data model are these.

  • Fibre names. Only the names listed in Annex I may be used to describe fibre composition (Article 5). Elastane, not spandex; polyamide or nylon, as listed.
  • Percentages. A multi-fibre product lists each fibre by name and percentage by weight, in descending order (Article 9). Fibres that are hard to state at the time of manufacture may be grouped as "other fibres" if each is up to 5%, or together up to 15%.
  • Pure products. Only a product made entirely of one fibre may be described as "100%", "pure" or "all". Extraneous fibres up to 2% of the product weight are tolerated where technically unavoidable, or 5% for carded products (Articles 7 and 20).
  • Decorative and antistatic fibres. Visible, purely decorative fibres up to 7% of the product weight, and antistatic fibres up to 2%, need not be counted (Article 10).
  • Manufacturing tolerance. A 3% tolerance is allowed between the stated composition and the analysed percentages, in relation to the total weight of fibres shown on the label (Article 20(3)).
  • Multi-component products. Where a product has two or more textile components with different fibre contents, the composition of each must be stated (Article 11). Labelling is not compulsory for components that are not main linings and make up less than 30% of the total weight (Article 11(2)).
  • Non-textile parts of animal origin. A product containing them must carry the phrase "Contains non-textile parts of animal origin" (Article 12).
  • Items not counted. Annex VII excludes items such as non-textile parts, labels and badges, trimmings that are not an integral part of the product, buttons and buckles covered with textile, and, for most products, stitching and assembly threads unless they replace the warp or weft.
  • Visibility and language. Composition must be clearly visible to the consumer before purchase, including when buying online, and in the official language of the Member State where the product is sold unless that state provides otherwise (Article 16).

Annex VIII sets the analysis methods, and Annex IX the agreed allowances applied to the anhydrous (dry) mass of each fibre when composition is checked (Article 19). Wool has one more rule: "virgin wool" and "fleece wool" are reserved for wool that has not previously been incorporated in a finished product (Article 8), so recycled wool can never carry those names.

Why does a single composition text field break?

Most product files hold composition as one string, for example Shell: 98% CO 2% EA / Lining: 100% PES. It prints well on a label. It fails as passport data in at least five ways.

  1. No validation. Software cannot reliably check that each component adds up to 100% when abbreviations, slashes and line breaks vary from file to file.
  2. No translation. A passport is read in many languages. A structured fibre name can be translated to the Annex I name in each language; a free-text string with trade names or codes cannot.
  3. No calculation. Recycled content, organic content and recyclability are calculated per fibre and per component, then weighted by component mass. A string has no weights.
  4. No link to evidence. A test report or a recycled content certificate covers a specific fabric from a specific supplier. It needs to attach to that component, not to the whole sentence.
  5. No use for sorters. The JRC study notes that near-infrared sorting struggles with multi-layered items, fabrics with different fibres on the outer and inner layers, and blends where the minor material is below 5%. Those are exactly the cases where structured component data adds value.

What does a component-level data model look like?

A workable model has four levels. Each level holds only what belongs to it, and the label text is generated from the data rather than stored as the data.

LevelKey fieldsNotes
Product (variant)GTIN, style code, colour, size, total weight excluding trimsComposition usually does not vary by size; weight does
ComponentRole (shell, lining, padding, rib, pocket bag, trim), textile or non-textile, weight or weight share, main lining yes/no, animal origin yes/no, supplier and material referencePadding or wadding is a textile component in its own right
Fibre lineAnnex I fibre name, percentage, recycled share of that fibre, type of recycled input, organic yes/noPercentages per component must total 100
EvidenceDocument type, issuer, scope (fabric, batch), validity dates, link to the fibre line or component it supportsA value without evidence is shown as declared, not proven

Two flags do most of the regulatory work. "Main lining" decides whether the 30% exemption in Article 11(2) can apply. "Animal origin" on a non-textile component triggers the Article 12 phrase. Both are easy to capture once and hard to reconstruct later from a text field. The passport field list shows where composition sits among the other modules.

How does the model handle a denim jacket with metal trims?

A stretch denim jacket with cotton-blend pocket bags, metal buttons and rivets, and a leather patch at the back waistband. Weights are illustrative.

ComponentTypeWeightCompositionRecycled
Shell (denim)Textile620 g98% cotton, 2% elastane20% of shell weight is recycled cotton
Pocket bagsTextile, not a main lining40 g65% polyester, 35% cottonNone
Sewing threadTextile, assembly threadnot counted100% polyesterNone
Buttons and rivetsNon-textile25 gMetal (alloy per supplier)n/a
Back patchNon-textile, animal origin6 gLeathern/a

What the rules produce from this data:

  • The label states the shell composition. The pocket bags weigh 40 g of 660 g of textile, about 6%, and are not a main lining, so under Article 11(2) their composition need not be labelled. The passport can still hold it, and a recycler will want it.
  • Assembly thread and the metal trims are not taken into account in the fibre percentages (Annex VII), but the trims are still part of the product and belong in the component list.
  • The leather patch triggers "Contains non-textile parts of animal origin" (Article 12).
  • Recycled content at product level: 20% of 620 g is 124 g of recycled cotton, which is about 18.8% of the 660 g textile weight excluding trims. The figure is derived from the data, so it updates when a component changes.

How does the model handle a jumper knitted from a blended yarn?

A jumper knitted from one blended yarn, with a narrow stripe of metallised decorative yarn. Weights are illustrative.

ComponentTypeWeightCompositionRecycled
Body, sleeves, ribs (blended yarn)Textile400 g60% wool, 40% polyamideAll the wool is recycled wool
Decorative stripeTextile, visible and purely decorative12 gMetallised fibreNone
  • The blend is one component even though it contains two fibres. Body, sleeves and ribs share the same yarn, so they need not be separate components unless their fibre content differs.
  • The decorative stripe is 12 g of 412 g, under 3%, so under Article 10 it need not be counted in the composition, provided it is visible, isolable and purely decorative.
  • The TLR fibre name remains "wool". The recycled origin lives in its own field, and the wool cannot be described as "virgin wool" (Article 8).
  • Recycled content: 60% of 400 g is 240 g, about 58% of the total weight. Whether the denominator includes the decorative stripe is a methodology question the delegated act is expected to settle; record the weights so either calculation is possible.

How is recycled content evidenced?

The TLR fibre names do not distinguish recycled from virgin fibre. Recycled content is therefore a separate claim, and from 27 September 2026 Directive (EU) 2024/825 applies in the Member States, banning, among other practices, sustainability labels that are not based on a certification scheme or established by public authorities.

The JRC study describes current practice: recycled and organic content is usually documented through third-party certification schemes based on chain-of-custody models, such as the Global Recycled Standard and the Recycled Claim Standard, generally at model or batch level. It also notes that the type of waste the recycled material comes from is not reported consistently.

The study proposes recycled content as a percentage by weight of the product, with a methodology to be set in the delegated act based on ISO 14021:2016, supported by the product weight excluding trims, the amount of recycled material, the type of waste and a conformity certificate or self-declaration. It flags a terminology trap: ISO 14021 "post-consumer" corresponds to pre- plus post-consumer under the ESPR, and ISO "pre-consumer" corresponds to "post-industrial" under the ESPR. Store the source category as the supplier reports it, together with the standard it refers to.

In the data model, each recycled share on a fibre line should point to the certificate or declaration that covers that fabric and batch, with its validity dates. More on this in linking passport fields to certificates.

What does the JRC May 2026 study mean for composition data?

The JRC published its study on passport content for textile apparel under the ESPR in May 2026. It is an external study prepared for the JRC and states that it does not necessarily reflect the Commission's position. The textile delegated act, which will set the actual fields, is planned for 2027. With that caveat, the study points in a clear direction.

  • Fibre composition is proposed as a public data point at model level, based on the TLR and the clean dry mass method.
  • Recycled content (%) is proposed at model level and public, with the type of waste and the conformity certification at batch level.
  • "Components specification" in the study means identifying replaceable components, for example by GTIN, to support repair. The study suggests it could be voluntary. It is not a component-level composition structure.
  • TLR revision. The study lists items under consideration in the separate TLR revision, including the composition of non-textile parts, care instructions, origin and size, with basic information on the physical label and supplementary information on a digital label hosted on the passport.

The study does not prescribe how composition is structured inside the passport. The component model above is not a legal requirement; it is the structure that lets you produce whatever format the delegated act settles on, and the TLR label, from the same data. Dates are tracked on our regulation timeline.

How do you clean up existing product files?

  1. Export composition for every active style and variant into one sheet, with GTIN and style code.
  2. Split each composition string into components, then into fibre lines.
  3. Replace trade names, abbreviations and local terms with Annex I fibre names.
  4. Check that every component totals 100%, and flag rounding differences.
  5. Assign a role to each component and mark main linings.
  6. Record component weights from the bill of materials or a weighed sample, and mark trims and non-textile parts.
  7. Flag non-textile parts of animal origin and confirm the Article 12 phrase is on the label.
  8. Separate recycled and organic shares from the fibre name, with the type of input and the reporting standard.
  9. Attach the test report, certificate or supplier declaration to each component it supports, with validity dates.
  10. Compare the regenerated label text with the label actually printed, and resolve every difference.

Step 10 usually finds the most problems: care labels ordered from an earlier spec, or a fabric change that never reached the label. The readiness check gives a quick view of where your data stands.

HyperDPP stores fibre composition per component with a 100% check and links each value to its evidence, so the passport, the label text and buyer requests come from the same record. Regulatory information last checked November 2026.

Frequently asked questions

What is the legal basis for fibre composition on EU garment labels?

Regulation (EU) No 1007/2011 on textile fibre names and labelling. It sets the permitted fibre names, requires percentages by weight in descending order, and governs multi-component products and tolerances.

Do I have to label the composition of a jacket lining separately?

Yes, where the lining has a different fibre content. Article 11 requires the composition of each textile component, but components that are not main linings and make up less than 30% of the total weight need not be labelled.

What manufacturing tolerance applies to stated fibre percentages?

Article 20 allows a 3% manufacturing tolerance between the stated fibre composition and the percentages found by analysis, in relation to the total weight of fibres shown on the label.

Will the textile passport require composition per component?

Not decided. The JRC study of May 2026 proposes fibre composition based on the Textile Labelling Regulation but does not set a component-level structure, and the textile delegated act is planned for 2027.

See a live passport for your own product.

In a 30-minute session we take one of your products, build its passport from your own file, and map the missing fields and evidence status together.

Request a demo →