
A digital product passport collects claims about a product: what it is made of, where it was made, which substances it contains, how much recycled material went into it. Each of those claims will be read by someone who cannot see the factory. A consumer reading "contains 40% recycled polyester" has no way to check it. A market surveillance authority or a business customer does, and the first thing they will ask is what the number rests on.
This article covers that link between a field and its evidence: levels of confidence, which document supports which data, validity, and what EU claim rules now forbid.
What is the difference between declared, documented and verified data?
Every value in a passport sits at one of three levels. Naming the level explicitly, per field, is the simplest way to see where a passport is weak.
- Declared: a supplier or your own team states the value. "Fabric woven in Portugal" in an email from the fabric agent is declared data. It may well be true, but nothing outside the statement supports it.
- Documented: the value is backed by a document produced in the normal course of business or by a lab: a bill of materials, a commercial invoice, a fibre composition test report, a signed supplier declaration on restricted substances. The document can be retrieved and checked against the value.
- Verified: an independent third party has checked the value or the system that produced it, typically through certification with on-site audits, such as a GOTS or GRS transaction certificate covering the goods you bought.
Not every field needs to be verified. A care instruction declared by the brand is fine. A recycled content percentage that is only declared is a liability. The aim is to make the level visible, not to certify everything.
ESPR, Regulation (EU) 2024/1781, requires that data in a digital product passport be accurate, complete and up to date (Article 9(1)). Its Annex III lists, among the information a passport may contain, compliance documentation such as the declaration of conformity, technical documentation or conformity certificates. Which of these the textile passport will require is not decided yet: the apparel delegated act, planned for adoption in 2027, will set it. The Joint Research Centre's May 2026 proposal on textile passport content is a preparatory input, not the final list.
Which evidence backs which kind of claim?
Textile evidence comes in four families that answer different questions. A common mistake is using one to answer another's question.
Scope certificates and transaction certificates (GOTS, GRS, OCS)
The Global Organic Textile Standard (GOTS) and the Textile Exchange standards built on the Content Claim Standard, including the Global Recycled Standard (GRS) and the Organic Content Standard (OCS), use two kinds of certificate.
- A scope certificate confirms that a company, its sites and listed product categories were audited and that it may process or trade certified goods. It says nothing about any particular delivery.
- A transaction certificate is issued by the certification body for specific goods sold by a certified seller to a named buyer. It is the document that shows those goods are certified.
GOTS's procedure for issuing transaction certificates (version 4.0, released May 2026, effective 1 January 2027) states that a certification body shall not issue a transaction certificate unless the seller held a valid scope certificate with the same certification body on the shipment date, and that a suspended, withdrawn or expired scope certificate is not valid. Textile Exchange's Content Claim Standard certification procedures require the certification body to check, before issuing a transaction certificate, that enough claimed input material was purchased to produce the claimed output, allowing for losses, and that incoming transaction certificates have not already been used for other outgoing ones.
For a passport: a scope certificate supports a field such as "facility certified to GOTS", but a product-level claim such as "52% recycled polyester" needs the transaction certificate covering the goods you bought. For a knitted jumper in a blended yarn of OCS organic cotton and GRS recycled polyester, the supplier's scope certificates are context; the evidence is the transaction certificates for the yarn or panels in that order.
GOTS also sets labelling grades: "organic" for at least 95% certified organic fibres and "made with organic materials" for at least 70%. A passport field should use the grade wording the certificate supports, not a stronger one.
OEKO-TEX STANDARD 100
STANDARD 100 is a product label for harmful substances. OEKO-TEX states that certified articles, including every thread, button and accessory of the certified item, are tested against a list of more than 1,000 harmful substances, with stricter limits for product classes with more skin contact (class 1 covers articles for babies and children up to 3 years). The certificate is issued for one year, and its number can be checked in the OEKO-TEX Label Check.
It is good evidence for "tested for harmful substances" at the level of the certified article, and not evidence of origin, organic status or recycled content. Check the coverage: a fabric mill's certificate covers the fabric, not the finished printed T-shirt with its ink and neck label.
Test reports
Laboratory reports support measurable values: fibre composition, colour fastness, restricted substances, dimensional stability. For composition, Regulation (EU) No 1007/2011 on textile fibre names sets the analysis methods in its Annex VIII and allows a manufacturing tolerance of 3% between the declared composition and the analysed percentages (Article 20(3)). Only products made exclusively of one fibre may be labelled "100%", "pure" or "all", with extraneous fibres up to 2% by weight tolerated where technically unavoidable (Article 7).
A test report proves the composition of the sample tested, so record the sample, lot and date. Composition data by component is covered in more depth in our article on fibre composition by component.
Supplier declarations
Some information legally travels as a supplier statement. Under REACH, Regulation (EC) No 1907/2006, Article 33, a supplier of an article containing a Candidate List substance of very high concern above 0.1% weight by weight must give the recipient enough information for safe use, at least the substance's name, and must provide it to a consumer on request free of charge within 45 days. For a denim jacket with metal buttons and rivets, the trims supplier's REACH declaration is the expected document, and a test report on the plating strengthens it.
A good declaration names the product, signatory, date and regulatory list version. "Our products comply with all applicable laws" is not a declaration about your product.
How should validity dates and expiry be handled?
A passport correct at launch can carry an expired certificate a year later. Three dates matter:
- Issue date and expiry date of the certificate or declaration.
- Event date: for a transaction certificate, the shipment date. GOTS requires the seller's scope certificate to have been valid on that date. The transaction certificate is evidence about those goods, so the question is whether it was validly issued for them, not whether the seller's scope certificate is still current today.
- Review date: when you will next check it. For a STANDARD 100 certificate this follows the one-year cycle.
The practical rule: product-level evidence (a transaction certificate, a test report on that lot) is tied to the goods. Status-level evidence (a scope certificate, a STANDARD 100 certificate, a supplier declaration) must be current whenever the passport presents it as current. Certificates can be suspended or withdrawn before expiry, so check the issuer's own lookup, not a PDF on file. The same GOTS procedure requires each certification body to publish how its certificates can be authenticated, for example by a lookup page or a web address or QR code on the certificate.
What does Directive (EU) 2024/825 ban, and from when?
Directive (EU) 2024/825, on empowering consumers for the green transition, amends the Unfair Commercial Practices Directive and the Consumer Rights Directive. Member States had to adopt transposing measures by 27 March 2026 and apply them from 27 September 2026, so the rules now apply through national law.
The directive adds practices to the list that is always considered unfair, including:
- displaying a sustainability label that is not based on a certification scheme or established by public authorities;
- making a generic environmental claim where the trader cannot demonstrate recognised excellent environmental performance relevant to the claim; the recitals give "environmentally friendly", "eco-friendly" and "green" as examples of generic claims;
- making an environmental claim about the entire product when it concerns only one aspect of it;
- claiming, based on greenhouse gas offsetting, that a product has a neutral, reduced or positive impact.
It also treats as misleading a claim about future environmental performance without a clear, verifiable implementation plan checked by an independent third-party expert. A "certification scheme" in the directive's sense is a third-party verification scheme open to all traders on fair terms, developed with experts and stakeholders, with procedures for non-compliance and monitoring by an independent party.
For UK readers, the Competition and Markets Authority's Green Claims Code sets six principles for environmental claims, the last of which is that claims must be substantiated.
Why does a passport make vague claims visible?
Marketing copy can say "conscious cotton" on a hang tag and nowhere else. A passport is structured data, one field per attribute, published under a persistent identifier. A "sustainable" claim next to an empty evidence field, or a recycled content figure with no certificate reference, stands out in a way it never did in a brochure.
The structure also exposes the whole-product problem. If only a printed T-shirt's body fabric is GOTS-certified but the passport says "organic" at product level, the gap is visible to anyone who reads the composition fields. Teams already publishing product information in France will recognise this; see our article on AGEC and the EU passport.
Field-by-field evidence matrix
The table below is a working model, not the final textile passport field list, which is not yet adopted. Use it to assign an expected evidence type and level to each field you already hold.
| Passport field | Typical evidence | Target level | Watch for |
|---|---|---|---|
| Fibre composition by component | Lab test report; supplier specification | Documented | Sample and lot traceable to the batch; 3% tolerance under Regulation 1007/2011 |
| Organic content | GOTS or OCS transaction certificate for the goods | Verified | Scope certificate alone is not enough; GOTS grade wording (95% / 70%) |
| Recycled content | GRS (or other CCS-based) transaction certificate | Verified | Percentage on certificate matches the field; pre- or post-consumer split if shown |
| Countries of weaving, dyeing, making | Purchase orders, supplier declarations, certificate site lists | Documented | Subcontracted processes (dyeing, printing) are often missed |
| Manufacturing facility | Facility identifier, audit or scope certificate site list | Documented | Facility actually used for this order, not head office |
| Substances of very high concern | REACH Article 33 declaration; test report | Documented | Candidate List version and date |
| Harmful substances tested | OEKO-TEX STANDARD 100 certificate or test reports | Verified | One-year validity; certificate covers the whole article |
| Care instructions | Brand specification | Declared | Consistent with the physical label |
| Environmental claims shown to consumers | Certification scheme, or evidence of recognised excellent performance | Verified | Generic wording banned under Directive 2024/825 without it |
A passport field with the wrong evidence type, such as a scope certificate behind a product composition claim, should be treated as declared until the right document arrives. For mapping fields to modules and audiences, see the passport fields overview and our article on access layers.
What does an audit-ready evidence file look like?
An auditor, a business customer or an authority should be able to start from any field and reach the evidence in one step. This checklist covers what each record needs.
- Each field has an evidence level recorded: declared, documented or verified.
- Each piece of evidence has a type, issuer, document number and issue date.
- Expiry and review dates are recorded for every status-level document.
- Product-level claims link to transaction certificates or test reports for the specific goods, not only to scope certificates.
- The certificate holder's name and site match the supplier and facility in the passport.
- The products, materials and percentages on the certificate match the field values and the component they are attached to.
- Validity has been checked in the issuer's own lookup, with the check date recorded.
- Test reports identify the sample, lot and method used.
- Supplier declarations name the product, signatory, date and regulatory list version.
- Consumer-facing environmental wording has been reviewed against Directive 2024/825; generic terms are removed or backed by a certification scheme.
- Superseded evidence is kept, not deleted, with the date it was replaced.
- A named owner is responsible for renewals and for withdrawing a claim when evidence lapses.
Where does a passport platform fit?
This is mostly data discipline and can start in a spreadsheet. Collecting documents from suppliers is often the slow part; see our article on supplier data collection.
HyperDPP ties each passport value to its certificate, test report or supplier declaration, shows its evidence status (documented, tested, declared or pending), keeps certificates with their expiry dates and flags unproven claims before publication, as described on the trust and evidence page. To see where your current data stands, the readiness check is a short starting point. Regulatory information last checked November 2026.
Frequently asked questions
What is the difference between a scope certificate and a transaction certificate?
A scope certificate confirms that a company and its sites have been audited and may process or trade goods certified to a standard such as GOTS, GRS or OCS. A transaction certificate is issued by the certification body for specific goods sold to a specific buyer, and it is the document that shows those goods are certified.
Can a brand use a supplier's scope certificate as proof that its product is organic or recycled?
No. A scope certificate on its own does not prove that any particular delivery is certified. For a product-level content claim you need the transaction certificate covering the goods you bought, issued while the seller's scope certificate was valid.
How long is an OEKO-TEX STANDARD 100 certificate valid?
OEKO-TEX states that STANDARD 100 certificates are issued for one year. The certificate number printed on the label can be checked in the OEKO-TEX Label Check, and the holder must renew to keep using the label.
When do the EU bans on generic environmental claims apply?
Directive (EU) 2024/825 had to be transposed by Member States by 27 March 2026, and the national measures apply from 27 September 2026. From then, practices such as unsupported generic claims like 'eco-friendly' and self-made sustainability labels are prohibited.
Sources
- Directive (EU) 2024/825 (empowering consumers for the green transition), EUR-Lex
- Regulation (EU) 2024/1781 (ESPR), EUR-Lex
- Regulation (EU) No 1007/2011 on textile fibre names and labelling, EUR-Lex
- Regulation (EC) No 1907/2006 (REACH), EUR-Lex
- GOTS: Procedure and Template for Issuance of Transaction Certificates, version 4.0
- Textile Exchange: Content Claim Standard Certification Procedures V3.3
- OEKO-TEX STANDARD 100
- UK CMA: Green Claims Code
Regulatory information last checked November 2026. This article is general information, not legal advice.


