
A digital product passport is often described simply as a QR code that shows the product's data. That description hides the most important design decision in the whole system: not everyone who scans the code should see the same thing. A shopper, a garment sorter, a customs officer and a competitor holding the same printed T-shirt have very different rights to the information behind it.
This article sets out what Regulation (EU) 2024/1781, the Ecodesign for Sustainable Products Regulation (ESPR), actually says about access and confidentiality, and how textile companies can translate that into practical views for consumers, business partners, authorities and recyclers. Regulatory information last checked November 2026.
What does the ESPR say about who can access passport data?
The regulation deliberately does not define one universal access model. Instead, it tells the Commission what each product-specific delegated act must specify. Article 9(2)(f) requires the delegated act to set out "the actors that are to have access to data in the digital product passport and to what data they are to have access". Article 9(2)(g) does the same for the actors allowed to create a passport or update its data.
Article 10(1)(g) then says access to passport data must be regulated in line with the essential requirements in Article 11 and the access rights set in the delegated acts. Article 11(b) lists who must be given free and easy access according to those rights: customers, manufacturers, importers, distributors, dealers, professional repairers, independent operators, refurbishers, remanufacturers, recyclers, market surveillance authorities and customs authorities, civil society organisations, trade unions and other relevant actors.
Three further rules in Article 11 matter for access design:
- Write rights are restricted too. Article 11(f) restricts the right to introduce, modify or update passport data according to the access rights in the delegated acts.
- Integrity is mandatory. Article 11(g) requires data authentication, reliability and integrity, and Article 11(h) requires a high level of security and privacy and the prevention of fraud.
- Service providers may not exploit the data. Passport service providers may not sell, reuse or process the stored data beyond what the service requires, unless specifically agreed.
Finally, Article 14 asks the Commission to run a public web portal where stakeholders can search and compare passport data, again "in accordance with their access rights". The regulation therefore assumes, throughout, that passports have more than one layer.
How does the regulation protect confidential business information?
There is no single article that says "these fields are confidential". Protection works at two levels. First, when preparing ecodesign requirements, Article 5(10)(d) obliges the Commission to take into consideration the protection of confidential business information. In practice this means the textile delegated act itself should already avoid demanding public disclosure of commercially sensitive data where it is not needed.
Second, for substances of concern, Article 7(6)(b) allows duly justified exemptions from the tracking requirements, and the need to protect confidential business information is one of the listed grounds. That exemption has a hard limit: substances meeting the criteria in Article 2(27)(a) cannot be exempted when present above 0.1% weight by weight in products, relevant components or spare parts.
The ESPR does not define confidential business information. The EU Trade Secrets Directive (EU) 2016/943 is a useful reference point: information qualifies as a trade secret when it is not generally known, has commercial value because it is secret, and has been subject to reasonable steps to keep it secret. A supplier list you already publish in a transparency report fails the third test. A negotiated price per metre of denim does not.
What should a consumer view contain?
The consumer view is the one reached by scanning the carrier without logging in. The Commission's DPP FAQ says general access to product information is anonymous and needs no identification. It also confirms, citing the regulation, that personal customer data shall not be stored in the passport. Article 10(1)(e) allows it only with the customer's explicit consent.
For textiles, the Commission's apparel page lists the possible information categories: product identification and characteristics, fibre composition, use, repair and maintenance information, reuse, resale, disassembly and recycling information, origin information, and identification of relevant economic operators. The exact content will be set by the delegated act; the Commission plans adoption in Q4 2027.
A sensible consumer view therefore leads with what a buyer can act on: composition, care, repair options, how to dispose of the garment, and the substances information the law requires to be public. It should be readable on a phone in a fitting room, not a data dump.
What do business partners need to see?
Business partners include retailers, marketplaces, label suppliers and downstream operators. Article 10(3) requires economic operators to give dealers and online marketplaces a digital copy of the data carrier or the unique product identifier, free of charge and within five working days of a request. Retailers will also want the full public dataset in a machine-readable form, so they can display it on product pages.
Beyond that, a partner view usually carries operational data that is not secret but is not useful to consumers either: GTINs at size and colour level, batch references, packaging specifications, and links to certificates. Our article on linking passport fields to certificates covers how evidence documents can sit behind a field without being exposed to everyone.
What can market surveillance and customs authorities reach?
Authorities sit at the top of the access hierarchy. Article 11(b) names market surveillance and customs authorities explicitly, and Article 13(6) gives the Commission, competent national authorities and customs authorities access to the DPP registry for their duties. The registry stores unique identifiers, not the full product data; the Commission's FAQ describes it as linking identifiers to where the data is held.
The regulation also uses the passport as a channel for compliance documents. Annex III lists compliance documentation such as the declaration of conformity and technical documentation among the data that delegated acts can include, and Article 36(3) says that where a passport exists, technical documentation that must be digitally available is to be made available through it. An authority view should therefore expose documentation and evidence that consumers will never see.
Customs needs much less. The Commission's FAQ says customs will check the registry for a valid, unique registration identifier, and that the link between the registry and the EU customs system is expected around 2029.
What do repairers, sorters and recyclers need?
For textiles, the recycler view is where the most value sits. A mechanical recycler sorting post-consumer jumpers needs the exact fibre blend, the presence of elastane, the type of coatings and finishes, and whether trims such as metal buttons or rivets must be removed first. The Commission's FAQ says recyclers may access material composition and substances of concern information, and repairers may access disassembly and spare-part information, where the delegated act requires these data points.
Much of this can be public without harm. But some fields are more detailed than a consumer needs: substance location by component, chemical names and concentrations under Article 7(5), or disassembly instructions for a jacket with a removable lining. These belong in a professional view, with the summary version in the consumer view. Component-level composition is covered in detail in fibre composition by component.
Which audience sees which textile field?
The table below is a working proposal, not a legal requirement. The textile delegated act will make the final call, and the JRC proposal published in May 2026 is an input to it, not the rule itself. Use the table to set up your data model so that each field carries an audience tag that you can change later.
| Field (example: denim jacket with metal trims) | Consumer | Business partner | Authority | Repairer / recycler |
|---|---|---|---|---|
| Product name, model, GTIN, unique identifier | Yes | Yes | Yes | Yes |
| Fibre composition (98% cotton, 2% elastane) | Yes | Yes | Yes | Yes, by component |
| Care and repair instructions | Yes | Yes | Yes | Yes, plus disassembly detail |
| Country of weaving, dyeing, making | Likely | Yes | Yes | Optional |
| Substances of concern (name, location, concentration) | Summary as required | Yes | Yes, full detail | Yes, full detail |
| Trim materials (zinc alloy rivets, polyester thread) | Summary | Yes | Yes | Yes |
| Manufacturer and importer identity and contact | Yes | Yes | Yes | Yes |
| Facility identifiers for tier 1 and tier 2 | Undecided | Case by case | Yes | Rarely needed |
| Declaration of conformity, technical documentation, test reports | No | On request | Yes | No |
| Prices, volumes, supplier contract terms | No | No | Only if requested | No |
For a field-by-field view of the modules this table draws on, see the passport fields and modules page.
How should supplier names and factory addresses be handled?
This is the question compliance and sourcing teams argue about most. The legal starting point is narrower than many assume. Annex III of the ESPR lists unique operator identifiers for economic operators other than the manufacturer, and unique facility identifiers, among the data that delegated acts can require. Article 12 describes how those identifiers are to be issued. Whether a consumer will see a factory's name and address, or only an identifier that authorities can resolve, is not decided for textiles.
A practical approach while you wait:
- Store facilities as structured records, with an identifier, name, address, country and process step (weaving, dyeing, cut and sew), rather than as free text in a product field.
- Separate identity from disclosure. The same facility record can be shown as "Made in Portugal" to consumers, as a named factory to authorities, and not at all to a competing brand.
- Check what you already publish. If your supplier list is already public, calling it confidential in the passport adds nothing and will be hard to defend.
- Agree disclosure with suppliers in writing. A tier 2 dye house may accept being identified to authorities but not to the public. Record that consent next to the facility record.
- Do not let restriction become an excuse for missing data. Under Article 36(2), economic operators must tell market surveillance authorities, on a reasoned request, who supplied them and whom they supplied, including quantities and exact models, within 15 days, and keep this information for 10 years.
Why does versioning matter when an authority asks?
Article 9(1) requires passport data to be accurate, complete and up to date. Updating a field is normal: a supplier changes, a test report is renewed, a care instruction is corrected. The problem arises when an authority checks a product bought six months ago and the passport now shows today's values.
Keep every change with a timestamp, the user or system that made it, and the reason. Tie data to the level the delegated act will require, whether model, batch or item (Article 9(2)(d)), so that a batch made in March is not silently described by data that applies to a batch made in September. Article 11 also requires that where a new passport is created for a product that already has one, it is linked to the original.
Under Article 27(10), manufacturers must give a national authority, on a reasoned request, all information and documentation needed to demonstrate conformity, within 15 days. A versioned passport with linked evidence lets you answer from a record rather than rebuild history from email.
What are the most common mistakes?
Two opposite errors appear in almost every early project.
Putting everything public. Teams eager to show transparency publish full test reports, supplier contacts and bills of materials in the consumer view. The result is a page that consumers cannot read, information that competitors can harvest, and supplier relationships put at risk without their agreement. It also makes later restriction awkward, because data once published cannot be taken back.
Hiding what consumers are entitled to. The opposite error treats the consumer view as marketing and keeps substantive data behind a login. If the delegated act makes a field available to customers, restricting it is a compliance failure, not a commercial choice. Article 9(2)(e) also lets the delegated act specify how the passport is made accessible to customers before they are bound by a contract, which in practice means on product pages, not only after purchase.
Other recurring problems: hard-coding audiences into templates so that a change in the delegated act means a rebuild; mixing personal data (loyalty IDs, repair customer names) into passport records, which Article 10(1)(e) prohibits without explicit consent; and granting suppliers write access to the whole passport rather than to their own fields, contrary to the spirit of Article 11(f). For a timeline of when these rules bite, see the regulation timeline.
What should you set up now?
Until the textile delegated act is adopted, the safe position is to build for flexibility. Tag every field with an audience, keep restricted data as complete as public data, version everything, and keep facilities and suppliers as structured records with recorded disclosure consent. When the delegated act fixes the access rules, you change tags rather than data.
HyperDPP supports this approach with per-field audience settings for public, partner, authority and recycler views, and a change history on each passport record. The readiness check includes questions on access design if you want to see where your current data stands.
Frequently asked questions
Is all digital product passport data public?
No. The ESPR requires differentiated access: Article 9(2)(f) says delegated acts set which actors can access which data. Some information will be open to anyone who scans the carrier, other data only to specific actors such as authorities or recyclers.
Will consumers see the names of my factories?
It depends on the textile delegated act, which is not yet adopted. Annex III of the ESPR allows unique facility identifiers to be included, and the Commission lists origin information as a possible textile data category, but who sees facility details has not been decided.
Can market surveillance authorities see restricted passport data?
Yes. Article 11(b) lists market surveillance and customs authorities among the actors entitled to access according to their access rights, and Article 36(3) says technical documentation is to be made available through the passport where one exists.
Can personal data be stored in a product passport?
Not customers' personal data without explicit consent. Article 10(1)(e) of Regulation (EU) 2024/1781 prohibits storing personal data relating to customers in the passport without their explicit consent.
Sources
- Regulation (EU) 2024/1781 (ESPR), EUR-Lex
- European Commission: Digital Product Passport FAQs
- European Commission: Textile apparel and the Digital Product Passport
- Directive (EU) 2016/943 on trade secrets, EUR-Lex
Regulatory information last checked November 2026. This article is general information, not legal advice.


