Home/Blog

France AGEC product sheet for textiles and the EU passport

What France's AGEC Article 13 already requires textile brands to publish, how the product sheet works, and how that data maps onto a future EU passport.

Many textile brands treat the EU digital product passport as a project for 2028 or 2029. For anyone selling clothing in France, a large part of the data work is already a legal obligation. Since 2023, the French anti-waste and circular economy law (AGEC) has required brands to publish product-level environmental information online, including where their garments were woven, dyed and made.

This article explains exactly what the French rules require of textile companies today, how the information has to be published, and how each item is likely to map onto a future EU textile passport. It also covers the French environmental cost score for clothing and what changed on 1 October 2026. Regulatory information last checked November 2026.

What does Article 13 of the AGEC law require?

Law No. 2020-105 of 10 February 2020 on the fight against waste and the circular economy is known as the AGEC law. Its Article 13 inserted Article L. 541-9-1 into the French Environment Code. That article requires producers and importers of waste-generating products to inform consumers about the environmental qualities and characteristics of their products.

The law lists the qualities that can be covered: recycled content, use of renewable resources, durability, compostability, repairability, reuse potential, recyclability, and the presence of hazardous substances, precious metals or rare earths. It also covers information on the eco-modulation bonuses and penalties a producer pays under the extended producer responsibility scheme. The law requires the data to be published electronically, in a format that is easily reusable and can be processed automatically in aggregated form.

The details are set by Decree No. 2022-748 of 29 April 2022 on consumer information about the environmental qualities and characteristics of waste-generating products. It defines each quality, says which product categories each applies to, sets the mandatory wording, and fixes the format.

Which companies are covered, and since when?

The decree applies to new products intended for consumers. Business-to-business sales are outside scope, and the ministry's FAQ confirms that refurbished and second-hand products sold to consumers are not covered. The obligation falls on the business placing the product on the French market. A retailer that has products made under its own brand counts as the producer for those products.

The obligation was phased in using two cumulative thresholds, measured across all products covered by the decree:

Applies fromAnnual turnover (last financial year)Units placed on the French market per year
1 January 2023Above EUR 50 millionAt least 25,000
1 January 2024Above EUR 20 millionAt least 10,000
1 January 2025Above EUR 10 millionAt least 10,000

A brand selling 12,000 printed T-shirts a year in France with EUR 15 million turnover has therefore been in scope since 1 January 2025. Non-compliance can lead to an administrative fine of up to EUR 3,000 for an individual and EUR 15,000 for a company, according to the ministry's FAQ, and the French consumer authority (DGCCRF) is empowered to check.

What must a textile product sheet contain?

Clothing, household linen and footwear form category 11 of the French extended producer responsibility list. For that category, the decree and the ministry's FAQ require the following information where it applies:

  1. Recycled content. The mass share of recycled material, worded as "produit comportant au moins X % de matière recyclée". Ranges are not allowed. The calculation uses a reference size chosen by the producer. Leather articles are excluded from this item.
  2. Recyclability. A product may be described as "majoritairement recyclable" only if it meets five cumulative criteria, including effective collection and sorting, no disruptive substances, and recycled output above 50% of the collected mass. Producer responsibility organisations must give their members the information needed to check the criteria.
  3. Hazardous substances. Where a hazardous substance listed under Decree No. 2021-1285 is present above 0.1% by mass, the sheet states "contient une substance dangereuse" or, for substances of very high concern, "contient une substance extrêmement préoccupante", with the substance name. This must be published within six months of the substance being identified as hazardous. It may instead be given through the Scan4Chem app, with a link from the product sheet.
  4. Traceability. The country where each main manufacturing step took place. For textiles these are weaving (which the FAQ says includes knitting and nonwoven production), dyeing and printing, and making-up. For footwear they are stitching, assembly and finishing.
  5. Plastic microfibres. Where synthetic fibres exceed 50% of the product's mass, the sheet states that the product releases plastic microfibres into the environment when washed.
  6. Bonuses and penalties. Whether an eco-modulation bonus or penalty applies to the model, and the criteria behind it.

The FAQ clarifies two practical points on traceability. The obligation applies to each part of the product subject to labelling under the EU Textile Labelling Regulation (EU) No 1007/2011. Where steps happen in different countries for different textile parts, the producer gives the country where the largest share by mass of the model's textile fibres was processed. Where it varies by unit, the country where most units were made.

How must the information be published?

The French rules are specific about format, and they are closer to a passport than many teams realise:

  • A dematerialised product sheet. Each model needs a sheet on a dedicated website or page, titled "Fiche produit relative aux qualités et caractéristiques environnementales" followed by the model name and reference.
  • Free and available at purchase. The sheet must be accessible free of charge at the time of purchase. It does not have to be shown in physical shops, but must be easy to find on the producer's website.
  • Machine-readable. No template is imposed, but the FAQ states that a non-selectable PDF does not comply; formats must allow reuse and automated aggregation.
  • Model level, or finer if needed. One sheet per model. If characteristics differ by colour, the information is given per colour reference.
  • No blanks. "Information not available" is not acceptable. Zero or negative values need not be stated.
  • Dated updates and retention. When information changes, it is updated as quickly as possible and the update date shown. The decree requires the sheet to stay available for two years after the last unit is placed on the market.

What does this look like for a real garment?

Take a denim jacket: 98% cotton and 2% elastane shell, 100% polyester lining, zinc alloy buttons. The denim is woven and dyed in India, the jacket is cut and sewn in Vietnam, and the shell contains 20% recycled cotton.

Its French product sheet would state "produit comportant au moins X % de matière recyclée" for the recycled share of the whole product, calculated on the chosen reference size. Traceability gives India for weaving and dyeing and Vietnam for making-up. Because synthetics are well below 50% of the mass, the microfibre statement does not apply. Hazardous substances are listed only if one is present above the threshold.

Every one of those values is also a candidate passport field, which is why the mapping below matters.

How does AGEC data map onto a future EU textile passport?

The EU textile passport content is not fixed yet. The Commission plans to adopt the textile delegated act in Q4 2027 and says the exact information requirements will be defined in it. Its apparel page lists the likely categories: product identification and characteristics, fibre composition, use, repair and maintenance information, reuse and recycling information, origin information and identification of economic operators. The ESPR itself requires substances of concern to be trackable by name, location and concentration (Article 7(5)). The mapping below is therefore an informed estimate.

AGEC itemLikely passport moduleWhat changes
Recycled content (% of product)Material compositionLikely needs component and fibre-level detail, not one product figure
Recyclability statementEnd of life and recyclingRecyclers will need inputs (blends, trims, coatings), not just a yes or no
Hazardous substances (above 0.1%)Substances of concernESPR adds location and concentration; its definition of substances of concern differs from the French list
Traceability: weaving, dyeing and printing, making-upOrigin and supply chainESPR Annex III allows unique facility and operator identifiers, not only countries
Plastic microfibre releaseEnvironmental information (Annex I covers microplastic release)Method and wording at EU level not yet known
Eco-modulation bonus or penaltyNo clear equivalentFrench-specific; keep in the national layer
Product sheet per model or colourProduct identificationEU level may be model, batch or item (Article 9(2)(d)), reached through a data carrier on the product

Two differences deserve attention. First, AGEC information is reached online at the point of sale; the passport must be connected through a data carrier physically present on the product, its packaging or accompanying documents (ESPR Article 10(1)(b)). Second, AGEC traceability stops at a country, while the passport framework is built around identifiers for operators and facilities. Who will see those identifiers is covered in our article on passport access layers.

What is the French environmental cost score for clothing?

Separately from AGEC, France has created a textile environmental cost (coût environnemental). Decree No. 2025-957 of 6 September 2025 sets how it is calculated and communicated, and an order of the same date sets the label and calculation method for apparel. Both have applied since 1 October 2025. The cost is a whole number of impact points per product reference, calculated over the life cycle, and published through the government's Ecobalyse portal.

Displaying it is voluntary, but with conditions that bite:

  • Other scores trigger it. Anyone who voluntarily communicates a score covering environmental impacts of a textile product must also communicate the environmental cost, and the other score must not contradict it.
  • Portal first. A manufacturer or importer must publish the required information on the designated portal before communicating the cost, and may update it at most once every three months.
  • Third parties since 1 October 2026. Any person may calculate and communicate the cost for a product reference using available or estimated data. Until 1 October 2026, this was possible only with the producer's agreement or once the producer had published on the portal. If the producer has published a figure, third parties must use it and update within one month of any change.

The practical effect: a brand that does not publish its own figure may see one calculated by others from estimated data. The data needed for a credible calculation (materials, countries of each step, product mass) overlaps heavily with AGEC traceability and with the future passport.

What should textile companies do now?

  1. Check your turnover and French unit volumes against the thresholds above; most mid-sized brands selling in France are already in scope.
  2. Store traceability as structured data per component and step (facility, country, process), not as text typed into a web page.
  3. Make sure your product sheet is genuinely machine-readable, dated and kept online for two years after the last unit.
  4. Keep recycled content calculations, test reports and supplier declarations linked to each value, so they can be shown to the DGCCRF and later reused as passport evidence (see our article on evidence for passport fields).
  5. Decide whether to publish your own environmental cost before third parties do.
  6. Plan one data model that produces the French sheet now and the EU passport later, instead of two separate projects. The regulation timeline shows the EU dates.

HyperDPP stores traceability, composition and evidence per component, and can publish the same records as an AGEC-style product sheet and as a passport. To see how your existing product data would look, you can turn a CSV into a passport.

Frequently asked questions

Which French companies must publish an AGEC product sheet?

Producers, importers and other businesses placing new consumer products on the French market with annual turnover above EUR 10 million and at least 10,000 units a year, since 1 January 2025. Larger companies have been covered since 2023 and 2024.

What traceability information does AGEC require for clothing?

The country where the main steps took place: weaving (including knitting), dyeing and printing, and making-up. For footwear the steps are stitching, assembly and finishing.

Is the French coût environnemental score mandatory for clothing?

No. Displaying the environmental cost is voluntary under Decree No. 2025-957, in force since 1 October 2025. However, anyone who communicates another environmental score for a textile product must also communicate the environmental cost.

Will the EU digital product passport replace the AGEC product sheet?

That is not settled. The EU textile delegated act is planned for adoption in Q4 2027; until the passport applies, the French product sheet obligation continues as it stands, so the same data should be built to serve both.

See a live passport for your own product.

In a 30-minute session we take one of your products, build its passport from your own file, and map the missing fields and evidence status together.

Request a demo →